PRODUCTS CENTER
Iraq L-CNG station complete equipment
Category:
+86-15601559666
Product Description
L-CNG station complete equipment
Summary
L-CNG station is to turn liquefied natural gas (LNG) into compressed natural gas (CNG) through unload, pressure boost, vaporization, lastly refuel to vehicle by CNG dispenser. L-CNG station has the function of CNG main station and substation. The station consists of LNG storage tank, cryogenic high-pressure plunger pump, high-pressure air-heated vaporizer, water-bath type vaporizer (optional), priority panel, CNG cascades, CNG dispenser, process pipe, valves and PLC control system. It is convenient and quick to install with modular design and high integration level.
Key Parameter
|
Model |
YN-JQQ-1500A |
YN-JQQ-2x 1500A |
|
Working medium |
Liquefied Natural Gas( LNG) |
|
|
NO.of pumps |
1unit |
2units |
|
Max. discharge of pump |
1500L/h |
3000L/h |
|
Pressure after pumping |
25MPa |
|
|
Pipe line design temperature |
-196℃ |
|
|
Total power |
≤30KW |
≤65KW |
|
Noise |
≤55dB |
|
|
Explosive-proof grade |
Exd ⅡBT4 |
|
|
Dimension |
3500*2400*2400（ mm ） |
|
|
Control mode |
PLC full automatic control |
|
2.1 L-CNG Pump Skid
Summary
Skid-mounted layout makes installation easy. Plunger pump, instrument cabinet, valves and pipelines are integrated in the pump skid. High-pressure vaporizer, EAG vaporizer, water bath electric heater and priority panel also can be integrated in the skid as per customer's requirement. Advantages of skid: install-and-play, convenient and swift.
Equip with safety precautions such as combustible gas detection, leakage alarm, emergency cut-off etc.
Switch freely between dual pumps and high-pressure vaporizer, which improves the heat exchange efficiency. The working mode of single pump and dual pumps switched automatically, which assures equipment run efficiently.
In order to avoid shock transmitting to pump skid, the plunger is integrated into pump skid during transportation and separated from pump skid after pump skid is installed.
Advantages
Safe and reliable、Advanced technological process、Damping and noise reducing
2.2 High pressure vaporizer skid
Summary
High-pressure vaporization skid mainly consists of high-pressure vaporizer, water bath type electric heater, high-pressure EAG vaporizer, sequential control panel, but also equipped with ball valve, safety valve, instrument, combustible gas detector, explosion- proof junction box etc. integrate the decentralized installation equipment in a skid, which has the advantages of convenient transportation and installation, small footprint and so on.
Main parameters
|
High pressure vaporize |
1000Nm³/h~2000Nm³/h |
|
Water bath type electric heater (Optional) |
1000Nm³/h ~4000Nm³/h |
|
Sequential control pane |
1500Nm³/h ~4000Nm³/h |
|
Max. working pressur |
25MPa |